Google Home Essentials: Appropriate for tenants Smart security is made simple with SwitchBot Lock and Keypad Touch.

There are a ton of smart locks available right now, but none seem to be designed for people who live in apartments or don’t want to replace their current deadbolt in order to add a smart lock to their smart home. With the SwithBot Lock and Keypad Touch, SwitchBot is one of the only businesses to meet both of these demands.

WHAT ARE KEYPAD TOUCH AND SWITCHBOT LOCK? If you have even a passing familiarity with smart locks, you are surely aware that the old deadbolt system must be entirely removed before installing the new one. The Nest x Yale option and other smart locks work by first replacing the deadbolt on the door and pairing with your choice smart assistant.

The SwitchBot Lock is a little different in that it enhances the lock rather than replacing it. The gadget aligns with the thumb-turn and is fastened to the inside of your door. Whether you trigger the SwitchBot Lock using Google Assistant, your phone, or the company’s Keypad Touch, a motor inside the lock will turn it to lock and open it.

Even though you could easily use the SwitchBot Lock on its own, the Keypad Touch adds a ton more features. Whether it is on the threshold trim or the door itself, the Keypad Touch is located outside of your door. It has an enter key, a lock button for immediate security while leaving, and a 9-digit keypad. A fingerprint reader is located underneath that, allowing you to easily unlock your door without typing your key code. As an alternative, you might get the less expensive Keypad, which functions just as well despite not having a fingerprint sensor.

A LOT OF Methods to Unlock The multiple options for unlocking your door are one of the first features of the SwitchBot Lock in combination with the Keypad Touch that caught my attention. Of course, you can also use the SwitchBot app on your phone to unlock your door. Additionally, you may program a passcode to be entered manually or save a few fingerprints to rapidly unlock your door without having to enter any numbers. Those are the normal and preferred methods of entering your house.

The additional innovative ways to unlock, though, were what really won me over. To allow visitors to simply let themselves in, you may also set up temporary passcodes and fingerprints with SwitchBot. Give the code to a friend or someone you trust, and then choose a start and finish time so that there is only a brief window during which it may be utilized. As an alternative, the SwitchBot Lock comes with an NFC card that you can register, enabling you to quickly gain access by simply tapping the card on the lock. It’s quite surprising how many various access options SwitchBot thought to offer for the Lock and Keypad.

CONNECTIVITY WITH BLUETOOTH AND WI-FI AND GOOGLE ASSISTANT The vast array of connectivity possibilities offered for each device in what SwitchBot accomplishes is kind of amazing. As an illustration, SwitchBot also manufactures a hub known as the Hub Mini. When the hub is set up and your SwitchBot Lock and Keypad Touch are connected to it, both of those devices will be connected to your Wi-Fi network, enabling you to lock and unlock the device from any location with an internet connection.

Don’t worry if you decide against purchasing the Hub Mini; you can still use your phone to access your SwitchBot Lock if it is within Bluetooth range. Additionally, the Keypad and Keypad Touch will have Bluetooth communication capabilities with the SwitchBot Lock, enabling entry without a phone or an active Wi-Fi signal. It surprised me how quickly the SwitchBot Lock and Keypad Touch connected to the SwitchBot app during testing even though there was no Wi-Fi available.

Although some functionality is lost, the Switchbot software connects to and integrates Google Assistant fairly nicely. With Google Assistant, smart locks might be challenging, especially if they’re third-party. Asking Google Assistant to lock your door will cause the SwitchBot Lock to be locked. Making the lock a part of your evening Google Home routine works fantastically. That lock will automatically lock itself when you bid the Assistant good night.

But unlocking becomes a little trickier than I’d want. You must generate a PIN in order to use Google Assistant to unlock your door. You must say your PIN out loud, whether or not anyone else is there, when you ask for the door to be unlocked. You won’t be able to unlock your door with simply the Google Home app, however. The SwitchBot Lock appears in Google Home, but touching the symbol only displays a page with information and no option to manually unlock or lock the device. Fortunately, doing so is simple thanks to the SwitchBot software.

Since the SwitchBot Lock integrates so well with the Keypad Touch, I rarely use Google Assistant because of its slow reaction times on various devices. Instead, I always choose to enter my fingerprint.

PERFORMANCE AND HARDWARE When I first installed the SwitchBot Lock, I felt the knob you manually turn was a little flimsy. I’m happy to report that my early concerns have vanished and the SwitchBot Lock is very sturdy after more than a month of use. The motor within has enough power to easily move your thumb-turn, and I haven’t had a single lock fail.

A very similar level of construction may be found in the Keypad Touch that is mounted outside the door. The fingerprint scanner performs a wonderful job of capturing my thumbprint, and the face that holds the keys is made of a beautiful, sturdy silicone substance. You must be mindful of the angle at which you place your finger because the Keypad Touch only reads your fingerprint once to initially register it. I haven’t had many problems with the Keypad Touch aside from that.

INSTALLATION SwitchBot makes it quite simple to fit and remove the two devices in order to replace batteries or adjust them. This is especially true for the Keypad and Keypad Touch, which can simply be removed from the mounting base using a SIM removal tool. Four tiny screws that are used to modify how far away from the door your lock sits must be removed in order to remove the SwitchBot Lock. Fortunately, you can just change the batteries without doing this.

Since I live in an apartment, I attached the Keypad Touch and SwitchBot Lock to my door using the provided adhesive pads. Although the adhesive is advised for people who live in apartments, you can also screw the Keypad or Keypad Touch to the door or wall. Both equipment have performed admirably since being installed. Since I carelessly fastened the SwitchBot Lock on new paint, the only problem I experienced was my own fault. The SwitchBot Lock will remain in place as long as your paint is completely dry.

BATTERY The lock and keypad have now both been installed on my door for more than a month. Both batteries continue to read full even after a month. Although there are no battery percentages, you can readily tell how much of the battery has been used just by checking the battery level on the app for both devices. The kind of piece of mind you require is provided by the fact that both devices are still fully powered and trouble-free after this amount of time.

The batteries, according to SwitchBot, should last two years. That estimate seems to be accurate from what I can tell. I’m only two months into that timeframe, of course.

The ideal security combination is the Switchbot Lock and Keypad Touch. It should go without saying that items designed to work together and from the same manufacturer will also function as promised, but this isn’t always the case. Having said that, the SwitchBot Lock and Keypad or Keypad Touch pair together incredibly nicely. These two items operate excellently even without the Hub Mini, but adding one will give you a little more confidence when you want to confirm that you shut the front door.

The SwitchBot Lock costs just $99, and the SwitchBot Keypad Touch is included in a $160 bundle. These operate remarkably well and offer an absurd number of options and functions for the price when compared to other options. Most locks cost much more than $160. Although the fingerprint sensor is much more useful than you might expect, SwitchBot offers a bundle for $129 that includes the Lock and standard Keypad if you want to save a little money.

The SwitchBot Lock and Keypad Touch are an excellent pair of solutions for just about anyone, all things considered. Of course, this configuration is more than suitable for apartments, but even homeowners should consider these two gadgets if they want to start or update to a smart home powered by Google Assistant. The SwitchBot Lock and Keypad/Keypad Touch do nothing but deliver for what you get for the price you pay.

Invest in the Keypad Touch and Switchbot Lock. FTC Disclosure: We utilize automatic affiliate connections that generate revenue. More.
Check out 9to5Google on YouTube for more news:


Related Posts